Two motors are offered to match cutter speed with the application. The MB55 has a 55 rpm cutter speed for the heavier walls and standard cutter jobs such as stub removal from headers. The MB110 turns at 110 rpm to power specialty tooling with carbide inserts. These specialty cutters include the patented Multi-Prep® cutter which cleans the tube O.D. or is sized to remove membranes from between water wall tubes and places an O.D. bevel on the end in one operation. Others include removal of cladding from both single tubes and only one side of waterwall tubes.
The versatility of this beveling tool to machine tube ends is made even greater with the choice of crank feed or wrench feed. The wrench feed is designed for use in congested spaces where the side crank may interfere with the operation.
Standard and custom tooling assures that you perform the precise beveling application that you need. The multi-position tool holder allows the operator to perform up to three different machining types in a single pass. Machine tube ends faster, safer and with greater accuracy.
Working Range: 7/8" (22.2 mm) I.D. to 4" (102 mm) O.D.
Pneumatic Motor: 1-5/8 H.P. (1.20 kW)
Recommended Air Pressure: 90 PSI (6.1 Bar) Recommended Volume: 38 CFM (1.1 m3/min.)
Speed, MB55: 55 RPM
Speed, MB110: 110 RPM
Electric Motor: 1-1/2 H.P. (1.1 kW), 120/220 V, 6.0A
Speed: 97 -176 RPM
Minimum Working
Clearance: 3" (76.2 mm) X 15" (381 mm)
Weight, Pneumatic: 16 lbs. (7.3 kg)
Length, Pneumatic: 16" (406.4 mm)
Weight, Electric: 20 lbs. (9.1 kg)
Length, Electric: 18" (457.2 mm)
*Specifications are subject to change without notice.
